Browse all practice questions for the NCCER Advanced Rigger Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

NCCER Advanced Rigger Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is the significance of using a clear line of sight during a lift?
  • What is the main difference between a synthetic sling and a wire rope sling?
  • Which hitch would be used to secure a load without damaging the sling?
  • What does the term "load capacity" refer to in rigging?
  • Who is responsible for designing platforms used in lifting operations?
  • What does "WLL" stand for in rigging terminology?
  • What is the required design factor for a single point lift?
  • Are job site electrical hazards included in the lift plan?
  • Which of the following is an example of a lifting device?
  • What happens to the rated load of eyebolts during angular loading?
  • What must rotation-resistant rope support in relation to the designated load?
  • What does a Proof Test involve?
  • What type of loads is the shoulderless type of eyebolt designed specifically for?
  • Which of the following is a consequence of inadequate proof testing on personnel platforms?
  • What does backward stability measure in cranes?
  • What is one primary purpose of a rigging plan?
  • What does "multi-part rigging" involve?
  • What is a crucial step to verify after making structural changes to a lifting platform?
  • What is the role of a safety factor in rigging practices?
  • Who is responsible for planning a multiple crane lift?
  • What is the weight of a rebar or pipe calculated using the equation 1' x 1' x 1/4"?
  • What is the next step after proof testing a platform?
  • What are the main reasons for selecting a specific crane?
  • What is a primary benefit of stabilizing a load during rigging?
  • When should a master link be used in rigging?
  • Which of the following is a common type of fall protection used in rigging?
  • What does the term "wind load" refer to in rigging?
  • What should be done if a specific load weight exceeds the crane's capacity?
  • What safety factor is typically employed for rigging equipment?
  • Why are rigging plans important?
  • What is the maximum load that a platform lift can exceed?
  • Adding counterweight to a crane primarily affects which aspect?
  • Which component of rigging is designed to absorb shock loads?
  • During a multi-crane lift, who controls the lift?
  • What is the operational speed for lowering a platform during a proof test?
  • What is the primary risk of not stopping a lift when a load appears unstable?
  • What does a block factor help determine in the context of lifting?
  • What is meant by the "center of gravity" in rigging?
  • Why is it important to use a lifting beam for long loads like rebar?
  • What is a potential consequence of using a damaged sling?
  • What should be done after the test lift of a personnel platform?
  • How often should rigging gear be inspected?
  • What role does communication play during lifting operations?
  • What does an increased radius generally indicate about crane capacity?
  • Which of the following components is typically used in rigging to connect other hardware?
  • Which factor is crucial in assessing the effectiveness of a crane's stability?
  • What is one of the main goals of a rigging safety audit?
  • Why is it essential to inspect rigging gear before use?
  • What should be done if a load appears unstable while being lifted?
  • Can a proof test and trial lift be conducted together when feasible?
  • Why is proper communication essential during lifting operations?
  • What should be done if a load appears unstable while being lifted?
  • What is the primary reason to monitor the percentage of wear on hooks and shackles?
  • In which situation would a harness and lanyard system be required?
  • How does a "two-block" condition occur?
  • What does the term "shock load" mean in rigging?
  • What does the center of gravity represent in an object?
  • What can lead to the breaking or deformation of rigging gear?
  • What characterizes a four-part rigging system?
  • What is the required proof test percentage for capacity after structural repairs or alterations of a personnel hoisting platform?
  • Which of the following is NOT one of the four main types of rigging gear?
  • How does the position of the load on the hook affect its capacity?
  • What is the key safety precaution when handling lifting equipment?
  • During lifting operations, what should operators do if they lose sight of the load?
  • What is critical to consider when positioning a load for lifting?
  • Which factor is NOT mentioned as affecting the stability of a load being lifted?
  • To determine the stress on a snatch block during a vertical lift, what is the formula used?
  • After modifications to a hoisting platform, how is compliance tested effectively?
  • What is the purpose of a safety audit in rigging?
  • What is the formula for calculating the Sling Angle Factor (AF)?
  • What should be done if a rigger identifies unsafe conditions before a lift?
  • What aspect of environmental conditions should riggers be aware of?
  • In rigging, why is it important to follow manufacturer’s recommendations?
  • Which characteristic is essential for maintaining crane stability?
  • What is the minimum design factor for two or more hoisting attachments?
  • What is the danger of using worn or damaged rigging equipment?
  • What is one potential effect of unbalanced reeling?
  • To increase stability and capacity on a crawler crane, which of the following methods is recommended?
  • When should an "eye and eye" sling be used?
  • How does the crane radius affect its load capacity?
  • What is the Coefficient of Friction (CF) used to express?
  • What is the importance of a lift plan in rigging operations?
  • What type of meeting should be held before carrying out a lift operation?
  • What is the minimum requirement for personnel safety when using lifting platforms?
  • Which of the following statements is true regarding the use of personnel platforms?
  • How should slings be stored when not in use?
  • Who is responsible for implementing the multiple crane lift plan?
  • Which factor is crucial for determining the number of slings to use in a lift?
  • What occurs due to boom deflection when a load is applied to a crane?
  • What factor is critical for ensuring load stability during lifting?
  • To measure boom length, one must measure from where to where?
  • What is a common risk associated with improper rigging?
  • What is the maximum allowable wear percentage for hooks and shackles?
  • For complying with safety regulations, what is a critical aspect for personnel lifting devices?
  • What is one of the primary safety concerns for riggers when lifting loads?
  • What is the primary role of a rigger during lifting operations?
  • What kind of hitches can be used with a round sling?
  • When lifting loads, what is the role of the rigging angle?
  • When rigging a load, what factor should a rigger consider first?
  • What formula is used to determine the weight each crane is holding in a multiple crane lift?
  • At what angle can a swivel hoist ring lift loads?
  • For what purpose are slings used in lifting operations?
  • Which components must be considered when moving up an incline plane?
  • What action is required if a crane exceeds 75% of its net capacity when creating a lift plan?
  • When counterweight is added to the rear of the upperworks, what happens to the crane's center of gravity?
  • What is one benefit of using a swivel in rigging?
  • Which factors should be considered when determining the rigging configuration?
  • What is the purpose of a load cell in rigging applications?
  • Fall protection anchorage must be capable of withstanding how many pounds?
  • What does the term "maximum load capacity" refer to in rigging?
  • What impacts the effectiveness of load support by an eyebolt?
  • When modifying a crane, what is an integral part of ensuring safety and compliance?
  • What is a "jib" in rigging terminology?
  • Which of the following is a best practice for inspecting rigging gear?
  • What is the angle formed between the sling and the vertical line when lifting called?
  • What happens to the crane's center of gravity when the load is moved further away?
  • What can indicate that a sling is no longer safe to use?
  • Which of the following describes a crane operating in a quadrant of operation?
  • What can occur as a result of a sudden stop of the boom swing?
  • What is crucial to consider when planning a lift involving difficult environmental conditions?
  • For how long must a proof test load be suspended during personnel hoisting?
  • What is the significance of the proof test in ensuring the safety of a hoisting platform?
  • Why is load stabilization important in rigging?
  • What should be the focus when calculating the line pull needed for a snatch block?
  • What is the minimum safety factor for minimum breaking strength (MBS) in rigging?
  • How would you solve for the distance of an Equalizer Beam using the equation B = [CR2 / (CR1 + CR2)] x A?
  • Are body belts acceptable for fall protection when used alone?
  • In the equation for the distance of Equalizer Beam, what does “C” represent?
  • What must a Qualified Planner consider when preparing a lift plan for a multi-crane operation?
  • What type of hitch is commonly used to create a loop in a sling?
  • What material is noted for having the highest friction rate?
  • Which of the following actions should a rigger take after completing a lifting operation?
  • Which type of knot is commonly used for fastening two ropes together?
  • Why should you avoid overloading a hook?
  • What equipment is critical for ensuring the safety of personnel platforms?
  • How long should the lifting beam be in relation to the load?
  • What is the primary factor that affects a crane's stability?
  • How does increased temperature affect rigging hardware?
  • Which of the following best describes what a trial lift tests?
  • Which type of sling is known for its flexibility and ability to conform to the load?
  • What is the main risk of shock loading to a crane?
  • Which equation represents Sling Tension?
  • What does the acronym MBS stand for in rigging terminology?
  • When is a lifting beam necessary?
  • Define the term "block and tackle" in rigging.
  • In rigging, what concept is referred to when mentioning the term "load weight"?
  • When using a blind hole eyebolt, what must the depth be in relation to the thread diameter?
  • If there is any deviation from the original lift plan, what action should be taken?
  • What should be considered when assessing the load for stability?
  • In personnel hoisting, what weight must the platform be loaded with for a proof test?
  • What is the best location to lift an object effectively?
  • What safety protocols should be followed when operating a crane?
  • Which design factor is appropriate for a standard hoisting attachment?
  • What can unneeded wear on sheaves and wire rope lead to?
  • What is the primary purpose of a tag line in rigging?
  • What is the function of a shackle in rigging?
  • How does sling length affect load angle?
  • Which direction does lowering the boom affect the crane's center of gravity?
  • What is an essential consideration for the capacity of personnel platforms?
  • What are the main responsibilities of the Lift Director?
  • Why is maintaining communication during lifting operations crucial?
  • What is the primary purpose of rigging in construction?
  • What is a common failure mode of rigging gear?
  • What should personnel platforms NOT be used to lift?
  • How can environmental conditions impact rigging?
  • What is shock loading in relation to cranes?
  • What does "dynamic load" refer to in rigging?
  • What is the primary safety concern when using rigging gear?
  • While proof testing focuses on hardware, what do trial lifts primarily test?
  • What type of rope must support at least ten times the designated load?
  • Before finalizing a lift plan, what must the lift planner do?
  • What is the required safety distance of a crane working near an excavation site?
  • What is one potential consequence of side loading on a crane?
  • Which of the following is crucial for a rigger to ensure during a lift?
  • What is a pulley’s primary function in a rigging system?
  • What must a trial lift simulate in the overall process?
  • What does the term 'quadrant of operation' refer to in crane operations?
  • In the context of crane operations, what role do counterweights serve?
  • What should always be ensured before conducting a lift with a crane?
  • Why is it important for one designated person to control the lift during a multi-crane operation?
  • What is one of the main reasons for carrying out a proof test of a personnel platform after repairs?
  • How should rigging gear that shows significant wear be handled?
  • What is a Trial Lift?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy